search

CAB Apollo 1 Spezifikationen Seite 174

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 234
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
    •
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 173
Maintenance and Registering
D/28
Mod. Apollo
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
(fig.54/D)
REDUCERS AND DIFFERENTIAL AXLES
Figures illustrated are only an indication and may not corre-
spond to those parts mounted on your vehicle.
References made to the maintenance inlets, refer to pages,
(fig.56/D-(fig.57/D), where two standard axles have been
described for more accurate identification.
Reducer
Oil change (fig.53/D)
1. Stop the vehicle on a flat, level surface with differential
oil still hot.
2. Switch off the engine and remove the ignition key, hang up
a sign in the cab that reads “maintenance work under way”.
3. Place a container under the drain plugs to collect any oil
which may come out during replacement.
4. Remove the drain plug (fig.53/D Pos.”G1”) and the load-
ing/level plug (fig.53/D Pos.”F1”) to carry out a complete
drainage.
5. Allow the oil to completely drain out.
6. Replace the drain plugs and tighten them securely.
7. Pour an approved type of clean oil into the loading/level
plug (fig.53/D Pos.”F1”).
8. The level is correct when oil comes out of the loading/
level plug (fig.53/D Pos.”F1”).
9. Check for any leaks coming from the drain plugs.
10. Replace the load/level cap and tighten it securely.
Front/Rear Differential Axles
Oil change (fig.54/D)
1. Stop the vehicle on a flat, level surface with differential
oil still hot.
2. Switch off the engine and remove the ignition key, hang up
a sign in the cab that reads “maintenance work under way”.
3. Place a container under the drain plugs to collect any oil
which may come out during replacement.
4. Remove the drain plug (fig.54/D Pos.”G2”) and the load-
ing/level plug (fig.54/D Pos.”F2”) to carry out a complete
drainage.
5. Allow the oil to completely drain out.
6. Replace the drain plugs and tighten them securely.
7. Pour an approved type of clean oil into the loading/level
plug (fig.54/D Pos.”F2”).
8. The level is correct when oil comes out of the loading/
level plug (fig.54/D Pos.”F2”).
9. Check for any leaks coming from the drain plugs.
10. Replace the load/level cap and tighten it securely.
(fig.53/D)
G1
G2
F1
F2
Seitenansicht 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Etikettendrucker CAB Apollo 1
Etikettendrucker CAB A8+ Betreibershandbuch   (120 Seiten)
Etikettendrucker CAB A8+ Bedienungsanleitung   (11 Seiten)
Etikettendrucker CAB a2+ Bedienungsanleitung   (6 Seiten)
Etikettendrucker CAB MACH4 Bedienungsanleitung   (12 Seiten)
  • DreamLink Allen-sports Amrobe IRiver Simpson Electric
  • Logitech Subwoofer Alcatel-Lucent Nein Orion Kühlboxen Sharp Etikettendrucker Pioneer Digitale Videorecorder (DVR)
  • SEVERIN BA 3222 Cuisinart GR-11 Samsung P63F PSC Falcon 4620 Frigidaire FRA064VU1
  • Siemens GS29NVW30 Bedienungsanleitung Whirlpool FSCR 90420 Betriebsanweisung Sony M-560V Bedienungsanleitung Danby DDW1809 Bedienungsanleitung Yonanas 986 Gebrauchs- und Pflegehandbuch