CAB Apollo 1 Spezifikationen Seite 162

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 234
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 161
Maintenance and Registering
D/16
Mod. Apollo
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
HYDRAULIC OIL LEVEL
(fig.8/D Pos.”1”)
The hydraulic oil tank is positioned inside the chassis, under
the base of the telescopic arm.
The oil level can be checked via the transparent cap located
on the left side of the tank itself (fig. 8/D Pos “1”)
The level is correct when the oil can be seen through the
transparent cap (fig.8/D Pos.”1”) with all vehicle cylinders in
transport position.
To correctly check the level:
- Park the vehicle on a level surface.
- Fully retract the boom and lower it.
- Position cylinders in transport mode.
- Switch off the engine.
- Check the oil level using the transparent indicator
(fig.8/D Pos.”1”).
If the oil is not level, carry out the following operations:
- Bring the vehicle to a halt on flat ground.
- Retract the boom completely and bring it to horizontal
position.
- Switch off the engine and remove the ignition key, hang up
a sign in the cab that reads “maintenance work under way”.
- Remove the top up cap (fig.9/D Pos.”1”) and pour in the
DIECI recommended oil.
Top up the quantity necessary to bring it back to level.
Routine maintenance should be carried out at the prescribed
intervals.
- ATTENTION:
When topping up, do not exceed level and immediately
clean any spillage.
(fig.8/D)
1
(fig.9/D)
1
1
Seitenansicht 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare