CAB Apollo 1 Spezifikationen PDF herunterladen (Seite 173)

D/27

- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

C) Fork swivel cylinder: (ﬁg.47/D)

1. Start up the engine; pick up a load using the forks (ex-

ample a load bricks or some hay bales).

Tilt the forks completely backwards.

2. Engage the parking brake and put the transmission in

neutral.

3. Lift the boom off the ground just enough necessary to al-

low the forward inclination of the forks.

4. When the engine is running at 1400 RPMs, engage the

control lever to tilt the forks forward. During the fork move-

ment stop the engine. Movement of the swivel must slow

down and then stop as the engine slows down and stops.

If the forks continue to lower or move after the engine is

switched off, the block valve is faulty.

Repair the defect as quickly as possible, contact a DIECI

service centre.

(ﬁg.46/D) (Boom internal extension cylinder block valve)

(ﬁg.47/D) (External swivel plate cylinder block valve)

B) Boom extension cylinder: (ﬁg.46/D)

1. Start up the engine. Make sure that the parking brake is

engaged and the transmission in neutral.

2. Raise the boom and extend it completely.

3. When the engine is running at 1400 RPMs, engage the

control lever to retract the boom. During boom move-

ment stop the engine. The boom must slow down and

stop as the engine slows down and stops.

If the boom continues to move even after the engine is

switched off, the block valve is faulty. Repair the defect as

quickly as possible, contact a DIECI service centre.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 233 234

Keine Kommentare

CAB Apollo 1 Spezifikationen Seite 173