CAB Apollo 1 Bedienungsanleitung PDF herunterladen (Seite 21)

cab - Produkttechnik GmbHENG-20

Set the switch (5) to the required method of rewinding :

- Rewind with labels on the outer side of the silicon liner

- Rewind with labels on the inner side of the silicon liner

Selecting the Method of Rewinding

The external rewinder allows rewinding of labels in both ways, inside and outside

winding.

Connecting the Rewinder to the Power Supply

The rewinder operates with a supply voltage of 230V/ 50Hz or 115V/ 60Hz.

Before connecting the rewinder to the power supply, make sure that the

voltage selected on the power supply module is the same as your main power

supply !

1 - Power supply

connector

2 - Power switch

3 - Voltage selector cover

1 2 3

The current voltage setting of the power module is visible in the lid window (3).

If you have switched the operating voltage of your rewinder you need to

replace the fuses. For the standard setting of 230V, two fuses rated at

500mAT must be used. For operation at 115V, two fuses rated at 1AT must be

used. (Both types of fuses are shipped with the rewinder, one of which is

installed depending on the voltage setting.)

To alter the voltage, open the cover (3) and remove the voltage selector. Replace

the fuses as explained above. Slide the voltage selector back into the power

supply module so that the correct voltage is visible in the lid window.

Connect the rewinder to a grounded outlet using the power cable supplied in the

accessories package.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Keine Kommentare

CAB Apollo 1 Bedienungsanleitung Seite 21