CAB Apollo 1 Bedienungsanleitung PDF herunterladen (Seite 18)

ENG-17cab - Produkttechnik GmbH

Version xxxxx xxx m / xxx h

Printer info The parameter provides information about the firmware, the cumulative

length of printed media and the number of operating hours.

Set date Setting of the system date (day, month, year)

DD.xx.xxxx xx.MM.xxxx xx.xx.YYYY

Set time Setting of the system time (hour, minute, second)

hh.xx.xxxx xx.mm.xx xx.xx.ss

Character set Setting of the character set

Windows 1252 Windows 1250 ISO 8895-1 Codepage 850

EBCDIC Macintosh Codepage 852 ISO 8895-8

Format Card Command to format a PCMCIA card

No Yes

Copy Memory Card Command to copy a PCMCIA card

Ye s No

Selection, if the printhead is raised or not raised

from the printhead during the backfeed (Apollo 1 only)

head lift-off head down

Backfeed Setting of the backfeed mode in the cut or peel-off mode

smart always

Selection, if the backfeed should be avoided if possible

or always be carried out

Debug mode The "Debug mode" represents a tool for the firmware programmer only

Off On

Tear-off positio If the parameter is active, an additional feed forwards will take place after

completion of the print job. This makes it possible to cut off the last label

at the tear-off plate.

Off On

Pause reprint If the paramter is active, after completion of a print job, the print of the last

label may be repeated by pressing the

key.

On Off

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Keine Kommentare

CAB Apollo 1 Bedienungsanleitung Seite 18