CAB A6 Betreibershandbuch PDF herunterladen (Seite 126)

E-4 cab Produkttechnik GmbH & Co KG

A3-2 / A3 / A4 / A6

Replacing the Printhead A6

Fig. E-4 Changing Printhead A6 (I)

1. Remove the media from the printer.

2. Swing the lever (2) to the position shown in figure E-4. In this position, the

printhead assembly is unlocked but still lying on the print roller.

3. Loosen the printhead locking screws (1) using the Allen key (4).

WARNING !

Unplug the power cord from the power source before starting!

CAUTION !

Protect the printhead against damage by electrostatic dischargement !

- Put the printer on to a grounded conductive surface !

- Ground yourself during printhead replacement for example using a

grounded wrist-strap !

- Do not touch the connector pins of the printhead by naked hands !

Make sure the glass surface on the printhead is not touched by sharp

objects or your hand!

Appendix E - Replacing Assembly Units

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 137 138

Keine Kommentare

CAB A6 Betreibershandbuch Seite 126